YAMADA DOBBY

Cam Feeder Series

  • Cam Feeder (Gear Change System)

  • Change In Speed Will Not Affect Feed Pitch

  • Applicable For Thin or Thick Materials, Short or Long Feed Pitches, Narrow or Wide Materials

  • No Need to Adjust Stock Thickness

  • Feed Pitch is Easily Adjusted By Changing Gears

  • Intermittent Roll Feed Utilizing a Cam Driving System

  • The Lower Roll is Driven -- The Upper Roll Utilizes a Spring Tension System

  • Insertion of the Material Can Be Performed By Manually Adjusting the Air Valve

  • The Material End Detector Stops the Press at Top Dead Center

  • CFB-40G is suitable for high precision perforated metal applications


Picture of CF-740 feeder

CF-740G  Feeder


Picture of CFB feeder

CFB-40G  Feeder

Item Specification
Model CF-720G CF-740G CF-760G CF-780G CF-790G CFB-40G
(Special Front feed)
Stock Width (mm) 0 ~ 120 0 ~ 200 0 ~ 300 0 ~ 400 0 ~ 650 0 ~650
Stock Thickness (mm) 0.1 ~ 2.3 0 ~ 1.0
Feed Length (mm) 0 ~ 360 0.9 ~ 30
Feeding Angle 180 deg.  180 deg.
Optional Feeding Angle 210 deg. -
Pilot Release Angle Adjustable Adjustable
Installment Left Front
Optional Installment Right Rear
Feed Direction Left ---> Right Front ---> Rear
Optional Feed Direction Right ---> Left Rear ---> Front

[ Return to Home | Return to Menu | Table of Contents | Send E-Mail | Search ]
Last Update: 22/06/2009 © 2009 Yamada Dobby Europe. 
Web Site Maintained By: Yamada Dobby Europe. The Stamping Presses, Stamping Press Material Feeders, and Textile Weaving Dobby photographs shown on this web site may depict optional equipment. All data figures shown on this web site may vary according to actual operating conditions, therefore these figures are beyond guarantee. Specifications and appearance are subject to change without notice